Box Fill Calculator for Arizona
NEC 2017 box fill math for EV charger installers working in Arizona.
Every EVSE installation in Arizona eventually hits a junction or device box — disconnects, splice points, pull boxes — all of which must satisfy NEC 2017 Article 314.16 fill rules.
Worked example for Arizona
A 4-11/16" square × 2-1/8" deep box has a 42.0 in³ volume. Each #6 Cu conductor counts as 5.0 in³. With a 2-conductor + EGC EVSE branch landing in the box plus a device, you consume roughly 15-20 in³, leaving plenty of headroom — but a 60 A multi-port pull box can fill quickly with #4 or #2 AWG conductors.
Code & Utilities
EV installations in Arizona are governed by the 2017 National Electrical Code, in force since 2018. That includes Article 625 EVSE rules and the 125% continuous-load factor on charging branch circuits, though some 2020-cycle changes (like expanded EMS provisions) are not yet enforced statewide.
Major electric utilities serving Arizona include Arizona Public Service, Salt River Project, Tucson Electric Power. Each has its own service-upgrade timeline, EV rebate availability, and metering rules — confirm them before quoting commercial work.
Climate & Ampacity
Plan EV feeders against a 108°F ambient in Arizona — the resulting NEC 310.15(B) correction of 0.75× is what trims a #6 THWN-2 down to its true continuous rating. Because the correction is below 0.9, conductors that "look fine" on a 30°C ampacity table will not carry their nameplate current here — always derate explicitly.
Arizona takeaway
Always run box-fill math when the EVSE disconnect lives more than a few inches from the unit itself — that intermediate junction is where Arizona inspectors most often catch fill violations.